Cretate magseal line roller

[bond]

Hi guys....bought a used 2016 certate 2510pe-h.
Line roller jam up so try to service myself.

1) First, is the items orientation in correct order?
2) Magseal bearing is expensive, so i will buy normal
ball bearing to replace it...is it ok?
3) If i use normal bearing, do i need to remove the 2 pcs
of magnetic washers?

Thanks for all expert advise.

[bond]

Line roller

[bond]

The above orientation is different from the schematic too....

http://www.spin-review.ru/reels/daiw...e_2510pe_h.pdf

[sevric]

Best option would be to replace the bearing set up with an original set however i get your drift with the price from Daiwa. Never had to replace one myself and not looking forward to when i have too.
If you replace with standard bearings i would loose the magnetic bearings and washers and keep the 2 spacers and end cap pieces. I would then take it to a bearing specialist and get them to measure exactly what you need to fill the vacant space keeping your fingers crossed all the time.

[bond]

Thanks a lot Sir