Carbon drag washers.

[joeking]

Heys guys, recently got some carbon fibre drag washers for a certate and a little unsure if I should run them wet or dry?
Cheers Joe.

[seamonkey]

Diawa do a tube of Real Four Drag Grease - best thing for those.

[Rattler]

I use cals drag grease.

[driftcorp86]

I run mine dry, works fine

[nagz]

Cals or nothing

I've tried the daiwa stuff, its pretty average at staying in and on the washers

Make sure you rub it in real good, and make sure your washers and all drag related parts and areas are cleaned beforehand

Some guys run them dry, but the majority like moist

[mikey-]

It's so much smoother when you use lube...

[nagz]

Lol

[MattGeyer91]

+1 cals

[joeking]

Cheers guys, so they are just like all the fun things in life, works better lubricated

Two tea spoons of Merc 2-4-C with one spoonful of Inox and put that into a vessel and stir through - makes for a hell of a drag grease.

I have herd that Cal's dries up after a while - havent used it myself nor am I willing to try it, but have herd it from a few sources.

[Fishigan]

I use the Shimano Ace-2 Drag Grease.

[JIM1]

Put the washers in shellite to get any gunk off them then just a thin layer of grease, enough just to leave a fingerprint. I use inox grease and am a happy camper.