|
Jigs Want to find out which jigs perform best, drop in here… Gamakatsu, Slider, Ecogear, Nitro, Assassin... |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
TT Lures 1/40 HWS jigheads
Hi all, just curious what hook sizes you guys use for your Zman 2.5" grubs and the 1/40 HWS jigheads?
I ordered 2 packets of 1/0 sized HWS jigheads but they're slightly to long and actually come out of the tail . I was at my local and they had size 2 ones but they looked absolutely tiny compared to the Headhunter size 2 hooks so gave them a miss. Any insight would be great! |
#2
|
|||
|
|||
The tournament TT head hook sizes are longer than the Headhunter hooks in the same size. Size 2 or 1 should be ok for 2.5'' Z mans.
|
#3
|
||||
|
||||
I have size 1s but size 2 is a better fit imo, also allows for use on a 2" grub with the hook point right at the rear of the grub.
|
#4
|
|||
|
|||
I use the size 2 for hw's, fits perfect on the 2.5in grub but on the 2in it tends to exit past the tail. Haven't tried the size 1's though, probably cause 2 already works so good.
Sam
__________________
People say I'm addicted I tell them that there are worse things to get addicted to. |
#5
|
||||
|
||||
I say size 2
|
#6
|
|||
|
|||
Thanks guys I'll order some size 2's!
|
|
|