|
Electric Trolling Motors The ultimate bream fishing accessory... |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
||||
|
||||
V2 Minn Kota pedal speed control mod
Gday,
Recently modified a riptide SP V2 pedal for those interested. Eventually the speed board was warped and worn out (after magnets replaced also). If your stuck in old habits like me and sticking with the pedal, for around 10 bucks from a local electronics store a speed control pot can be installed. The new location i find is easier to adjust and havent had any accidental speed changes so far. Involves drilling 1 hole directly above the cable entry section of the top half of the pedal and soldering 3 wires to the brown black and orange cores. Pre solder the speed control pot end to make installation easier. I went for a 1k pot and happy with the range of control. Good luck!
__________________
Instagram.com/kale_scd |
|
|