Go Back   Bream Master Forums > Bream Boats > Boating Accessories

Boating Accessories Sounders, Fixings, Safety Gear and More



Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 17-11-2009, 04:56 AM
Justin Boyle's Avatar
Justin Boyle Justin Boyle is offline
Blue Lip
 
Join Date: Feb 2004
Location: Rivervale WA
Posts: 1,098
Chargers

Hey guys,

I'm looking at buying a charger. I have a 75ah battery for the leccy at the moment and would possibly upgrade to something bigger(on a side note how much bigger would a 130ah battery be because I don't have a lot more room in the current position)

The chargers I would be looking at would be a CTEK 15a or a projecta 16a. I have no problems with the CTEK and know it will do an awesome job. Thing is that they are expensive and probably for good reason. The projecta charger seems to offer everything the ctek does at 2/3 the price. On top of that the amps are selectable from 2-16a in increments which is also attractive because that way I can charge smaller batteries(my dad has a 25a ctek and they say not to charge small capacity batteries with it)

I remember an article in 4x4 australia that I plan to dig up about the projecta chargers but does anyone have an opinion. The projecta is a 7 stage charger with all the options the ctek has.

Justin
Reply With Quote
  #2  
Old 17-11-2009, 07:33 AM
Timmah's Avatar
Timmah Timmah is offline
Blue Lip
 
Join Date: May 2004
Location: Mount Nasura
Posts: 1,205
Hey dude,

I would go the Ctek. I started with a projecta and i wouldn't recomend it for charging your deep cycle. I have a 130ah battery and it would take a while for it to charge. I ended up upgrading to the ctek and i can charge my battery overnight. It also has a few more useful settings. Even though it costs more it is far better and will last you a lot longer.

Cheers
Tim
__________________
Webpage: http://livewellplumbingandaccessories.com
For all your Livewell and Bait tank requirements.

Proudly Supported By

Flow-Rite Australia(Marine Warehouse) http://www.marinewarehouse.com.au/pr...orts/flow-rite

Manky Jack http://mankyjack.com/

Searing Tackle-Pontoon 21-Damiki-Fish Arrow http://www.searingtackle.com.au/
Reply With Quote
  #3  
Old 17-11-2009, 07:48 AM
Justin Boyle's Avatar
Justin Boyle Justin Boyle is offline
Blue Lip
 
Join Date: Feb 2004
Location: Rivervale WA
Posts: 1,098
How big was your projecta Tim?
Reply With Quote
  #4  
Old 17-11-2009, 08:48 AM
Brad Y's Avatar
Brad Y Brad Y is offline
Blue Lip
 
Join Date: Apr 2004
Location: Busselton, WA
Posts: 4,861
I have a projecta 7 stage 16 amp charger and while I dont think it really has 7 stages, it seems to charge my 90 and 83 a/h batteries perfectly fine. For years I did perfectly fine with a 6 amp arlec charger on my 130ah trojan. The battery lasted almost 3 years. I also have an 8 amp guest charger built into my boat and it does very well too. I think for a lead acid battery, your better off making sure the plates have enough water over them etc, they are pretty well built these days. If I went out and bought a couple of full river AGM batteries then I would go for a big $ charger to maintain them, but when a 90 a/h AC Delco lasts as long as they do with a moderately priced charger and some proper maintainence, then it doesnt really seem worth it.
Reply With Quote
  #5  
Old 17-11-2009, 09:05 AM
Justin Boyle's Avatar
Justin Boyle Justin Boyle is offline
Blue Lip
 
Join Date: Feb 2004
Location: Rivervale WA
Posts: 1,098
Sounds like the one I'm looking at brad. Was the 130 in the tracker or in an old boat? It looks to me that it will be difficult putting anything in much bigger than the 75 I already have. How did the tohatsu go???
Reply With Quote
  #6  
Old 17-11-2009, 09:18 AM
Brad Y's Avatar
Brad Y Brad Y is offline
Blue Lip
 
Join Date: Apr 2004
Location: Busselton, WA
Posts: 4,861
I went the etec and goes very well. Cant say too much yet. The 130 was in my first ever boat- a 3m leccy powered super punt rig, then in my stessco 3.9 tinny. Both these rigs ran the same 55lb kota and 130hr battery.

If you want a bigger battery, the 90 a/h AC Delco fits and i have had a great run out of these batteries. As soon as i get off my behind i will have to get back into a 55lb leccy I think as carrying the extra battery for 24V is a bit of a pain.
Reply With Quote
  #7  
Old 18-11-2009, 08:09 AM
Noddy's Avatar
Noddy Noddy is offline
Mature Bream
 
Join Date: Aug 2005
Location: Huntingdale
Posts: 367
My old man was telling me the other day that some company did a test of all different types of batteries and found that marine cranking batteries lasted alot longer than deep cycle batteries with a 4 amp draw, can't remember what company or don't know how much relevance it has to how'd they'd go with leccy's. I'm getting him to email me the info then I'll post it up.
I think he was saying that the company was going to discontinue it's deep cycle range and just make the marine cranking instead.
Will have to have a read through the info first before I can confirm that though.
__________________
Noddy.

Location: Huntingdale W.A.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -4. The time now is 03:59 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Google