PDA

View Full Version : Help with the bow


wandtheswan
17-05-2003, 12:02 AM
Hey
iv got a question about the bow of my boat. It's not flat and i want to put a Bow mount Motorguide or Minn Kota on the front of it. I saw what Ira did for the comp with his Kota and is a good idea though i am looking at putting soemthing permanent on the front to fit a Electric.
Any ideas are much appreciated;)
cheers

wandtheswan
17-05-2003, 12:04 AM
Picture of my 4.4 metre boat

Rdavison
17-05-2003, 05:00 AM
Long is the flat bit around the rim? Or is it non existant?

Riley

wandtheswan
17-05-2003, 08:32 AM
i was maybe thinking of adding a flat plate on somehow.Or can i add a bow mount electric on to the bow how it is?

Bear
17-05-2003, 09:11 AM
Chris,
If you're going to mount it straight along the line then you can get the mounting plate which is raised at the middle. This is what I've done on the Angler.

This means you can have the curve in the middle and not effect the mounting. I can post you a pic if you like.

HTH.

wandtheswan
18-05-2003, 04:18 AM
thanks very much Bear
yes i would like a pic if you have it :)
cheers once again